5 GAL Penetrating Matte Look Water Repellent Sealer For Concrete, Pavers, Brick, And Natural Stone

5 GAL Penetrating Matte Look Water Repellent Sealer For Concrete, Pavers, Brick, And Natural Stone

The Armor WL550 is a penetrating, matte wet look water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. It will darken the surface to slightly enhance any dull and faded coloring. The Armor WL550 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Features

• Will reduce water absorption by up to 95%, reducing the damage and deterioration caused by water absorption such as cracking, spalling, pitting, mold, mildew, and algae.
• Coverage: Porous Surfaces: Up to 175 FT2/gallon in one coat.Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat. Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary.
• Application: The Armor WL550 should be applied with a solvent/acetone-resistant HVLP pump sprayer. For best results, avoid applying with a roller. For consistent coverage, one even coat should be applied. Do not let puddle, the product is not designed to leave a surface film. The product should be applied in the late afternoon/early evening when air and surface temperatures are declining.
• VOC Regulations: This product can not be shipped to California.

Details

Assembly

Warranty